Composite Tooling
Composite tooling is a staple of the prototyping industry and applications for low volume part runs. thyssenkrupp Engineered Plastics stocks a number of materials including Vacuum/Pressure casting Resins, Fastcast Castable Urethanes, and Reaction Injection Molding Resins. thyssenkrupp Engineered Plastics also supplies two-part silicone casting materials as well as foundry pattern materials and casting Polyurethanes.
Rampf Styling Boards, Modeling Boards and Tooling Boards
We stock a comprehensive range of epoxy and polyurethane boards for styling, modeling, and tooling. Our board and paste materials range from low to high density and they can be used for numerous applications including conventional modeling and prototyping applications, high-temperature tooling, RTM molds, checking, and stamping tools.
Tooling Notes for Polyurethane and Epoxy Boards, and Paste Materials:
Our line of RAKU-TOOL® products from RAMPF Group can be cut using normal wood working power tools with high speed steel tools. Although longer tool life can be maintained by using carbide tools.
For boards over 43.7 pcf (0.72 g/cm3 saw blades with offset carbide teeth will reduce binding.
Styling Boards
| RAKU-Tool | Key Properties | Applications |
|---|---|---|
| SB-0160 technical specifications | - Light Weight and Smooth Surface - Easily Shaped, Low Dust - Resistant to Organic Solvents | Design Study, Program Proving, Supporting Structures for Close Contour Pastes, Megative Molds for Casting |
| SB-0240 technical specifications | - Good Surface Structure - Easily Shaped and Machined - Resistant to Organic Solvents | Styling Models, Epoxy Laminating Molds, Support Structures, Negative Molds for Casting |
| SB-0470 technical specifications | - Very Good Surface Structure - Easily Shaped and Machined | Styling Models, Master Models and Data Control Models |
Styling Boards
| RAKU-Tool | Key Properties | Applications |
|---|---|---|
| SB-0160 technical specifications | - Light Weight and Smooth Surface - Easily Shaped, Low Dust - Resistant to Organic Solvents | Design Study, Program Proving, Supporting Structures for Close Contour Pastes, Megative Molds for Casting |
| SB-0240 technical specifications | - Good Surface Structure - Easily Shaped and Machined - Resistant to Organic Solvents | Styling Models, Epoxy Laminating Molds, Support Structures, Negative Molds for Casting |
| SB-0470 technical specifications | - Very Good Surface Structure - Easily Shaped and Machined | Styling Models, Master Models and Data Control Models |
Modeling Boards
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| MB-0540 Eco Board! Made from Recycled Material technical specifications | - Fine surface - Easily Shaped and Machined - Good dimensional stability - Low coefficient of thermal expansion - Light Brown | Master Models, Cubing Models, Patterns |
| MB-0600 technical specifications | - Fine Surface Structure - Easily Shaped and Machined - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Brown | Master Models, Cubing Models, Patterns |
| MB-0670 technical specifications | - Fine Surface Structure - Easily Shaped and Machined - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Brown | Master Models, Cubing Models, Patterns |
| MB-0720 technical specifications | - Excellent Surface Structure - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Good Compressive and Flexural Strength - Brown | Master Models, Cubing Models, Patterns |
Modeling Boards
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| MB-0540 Eco Board! Made from Recycled Material technical specifications | - Fine surface - Easily Shaped and Machined - Good dimensional stability - Low coefficient of thermal expansion - Light Brown | Master Models, Cubing Models, Patterns |
| MB-0600 technical specifications | - Fine Surface Structure - Easily Shaped and Machined - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Brown | Master Models, Cubing Models, Patterns |
| MB-0670 technical specifications | - Fine Surface Structure - Easily Shaped and Machined - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Brown | Master Models, Cubing Models, Patterns |
| MB-0720 technical specifications | - Excellent Surface Structure - Low Coefficient of Thermal Expansion - Good Dimensional Stability - Good Compressive and Flexural Strength - Brown | Master Models, Cubing Models, Patterns |
Working Boards
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| WB-0700 technical specifications | - Very Fine Surface Structure - Very Easily Shaped and Machined - Good Dimensional Stability - Temperature Resistance Up to 135°C | Lay Up Tools for Prepreg, High Temperature Applications, Vacuum Forming Molds |
| WB-0801 technical specifications | - Fine Surface Structure - High HDT and very low CTE - Good Edge Strength - Good Dimensional Stability - Good Compresive and Flexural Strength | Master Models, Cubing Models, Tooling Jigs, Vacuum Forming Tools |
| WB-1405 technical specifications | - Very Dense Surface - Easily Machined - High Mechanical Properties | Pattern Plates and Core Boxes, Molds and Tools; Hammer Forms and Jigs; Machined Negatives and Positives;Models, Molds, and Tools, Foundry Patterns |
| WB-1450 Eco Board Made From Recycled Material technical specifications | - Dense Surface Structure - Very Easily Machined - Good Dimensional Stability - Created From Dust and Chips From Other Polyurethane boards | Pattern Plates and Core Boxes, Molds and Tools, Hammer Forms and Jigs |
| WB-1700 technical specifications | - Very Dense Surface Structure, Can Be Polished - Easily Machined - Good Temperature Resistance - High Abrasion Resistance | Metal Forming Tools, Vacuum Forming Molds, Jigs, Foam Molds, Rapid Prototyping Molds |
Working Boards
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| WB-0700 technical specifications | - Very Fine Surface Structure - Very Easily Shaped and Machined - Good Dimensional Stability - Temperature Resistance Up to 135°C | Lay Up Tools for Prepreg, High Temperature Applications, Vacuum Forming Molds |
| WB-0801 technical specifications | - Fine Surface Structure - High HDT and very low CTE - Good Edge Strength - Good Dimensional Stability - Good Compresive and Flexural Strength | Master Models, Cubing Models, Tooling Jigs, Vacuum Forming Tools |
| WB-1405 technical specifications | - Very Dense Surface - Easily Machined - High Mechanical Properties | Pattern Plates and Core Boxes, Molds and Tools; Hammer Forms and Jigs; Machined Negatives and Positives;Models, Molds, and Tools, Foundry Patterns |
| WB-1450 Eco Board Made From Recycled Material technical specifications | - Dense Surface Structure - Very Easily Machined - Good Dimensional Stability - Created From Dust and Chips From Other Polyurethane boards | Pattern Plates and Core Boxes, Molds and Tools, Hammer Forms and Jigs |
| WB-1700 technical specifications | - Very Dense Surface Structure, Can Be Polished - Easily Machined - Good Temperature Resistance - High Abrasion Resistance | Metal Forming Tools, Vacuum Forming Molds, Jigs, Foam Molds, Rapid Prototyping Molds |
Rampf Close Contour Pastes
Rampf’s Raku-Tool Close Contour Pastes are an economic way to produce models for the Marine, Wind, Automotive and Aerospace Industries.
Advantages
- Excellent surface structure, smooth and seamless
- Good dimensional stability
- Easy to process
- Quick application
- Layer thickness up to 40mm without slump on vertical surfaces
- Quick cure schedule - machine after 24 hours
- Low density supporting structure
- Little waste when compared to boards
- Easy and quick machining with low dust
- Easy to repair
Close Contour Pastes
| Epoxy Resin | Epoxy Hardener | Key Properties | Applications |
|---|---|---|---|
| CP- 6050R technical specifications | CP- 6050H | - Very Smooth Homogeneous Surface - Easy to Machine, Very Little Dust - Can Be Machined After 24 Hours RT Curing - Light Brown - Epoxy Based | Design and Styling Models, Molds |
| CP- 6070R technical specifications | CP- 6070H | - Fine, Homogeneous Surface - Easy to Machine - Can Be Machined After 24 Hours RT Curing - Brown - Epxoy Based | Design and Styling Models, Master Models, Molds |
| CP- 6100R technical specifications | CP- 6100H | - Easy to Machine - Low Dust - High Surface Hardness - Low CTE - Light Blue - Epoxy Based | Jigs and Fixtures, Low Temp Pre-Peg Tools, Data Control Models, Composite Tools |
Close Contour Pastes
| Epoxy Resin | Epoxy Hardener | Key Properties | Applications |
|---|---|---|---|
| CP- 6050R technical specifications | CP- 6050H | - Very Smooth Homogeneous Surface - Easy to Machine, Very Little Dust - Can Be Machined After 24 Hours RT Curing - Light Brown - Epoxy Based | Design and Styling Models, Molds |
| CP- 6070R technical specifications | CP- 6070H | - Fine, Homogeneous Surface - Easy to Machine - Can Be Machined After 24 Hours RT Curing - Brown - Epxoy Based | Design and Styling Models, Master Models, Molds |
| CP- 6100R technical specifications | CP- 6100H | - Easy to Machine - Low Dust - High Surface Hardness - Low CTE - Light Blue - Epoxy Based | Jigs and Fixtures, Low Temp Pre-Peg Tools, Data Control Models, Composite Tools |
Rampf Closed Contour Casting
Close Contour Casting (3C) is the new, innovative concept from Rampf Tooling to produce close contour models through vacuum casting. 3C turns into 3D and your idea takes shape. Products produced with 3C are of the highest quality and the mechanical properties can be adjusted to meet your needs and applications.
From *3C to 3D- Your Benefits
- Quicker Machining, less tool wear and less wastage through close contour casting
- Less manual finishing required due to our vacuum casting process. The surface is seamless, smooth, and very dense.
- No Bonding, seamless surface of casting.
- Easy transport as the material is relatively light when compared to conventional materials.
- Good Dimensional Stability. Very little stress as the material is isotropic like board material.
- No Limitations
- QUICK DELIVERY!!
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| CC-6010 technical specifications | - Fine Surface Structure - Very Easily Shaped Machined - Similar quality to RAKU-TOOL modeling boards, without bonding lines | Master Models, Cubing Models, Patterns |
| CC-6015 | - Very Easily Machined - Dense Surface Structure - Low Coefficient of Thermal Expansion - Good Edge Strength | Wrapped Models, Molds and Tools for Rapid Prototyping, Tooling Jigs |
| CC-6503 technical specifications | - Very Dense Structure - Very Homogeneous, Fine Surface and as a Result, Very Good Nickel Bowl - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - Good Abrasion Resistance | Galvanobath Models, Lay Up Tools, RIM Tools |
| CC-6504 technical specifications | - Very Dense Structure - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - High Compressive Strength/Stiffness - Good Abrasion Resistance - Tools Do Not Need To Be Polished - Tools Weigh Less (vs Zamak) - Changes are easily possible | Metal Sheet Forming, Jigs |
| CC-6505 technical specifications | - Very Dense Structure - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - High Compressive Strength/Stiffness - Good Abrasion Resistance - Tools Do Not Need To Be Polished - Tools Weigh Less (vs Zamak) - Changes are easily possible | Stretch Dies, Jigs, RTM Tools |
| CC-6506 technical specifications | - Very Dense Surface Structure - Can Be Polished - Good Heat Resistance - High Compressive Strength - Good Resistance to Chemicals - Time Savings Through Direct Milling of Mold via Surface Data - Better Pressing of Sheet Metal Parts | Molds for Ceramic Pressure Casting, Metal Sheet Forming, Vacuum Forming Tools, Lay Up Tools |
| CC-6507 technical specifications | - Dense Surface Structure - Very Easily Machined - Good Dimensional Stability - Good Abrasion Resistance and Impact Strength | Pattern Plates and Core Boxes, Machined Negative and Postives, Models, Molds and Tools, Hammer Forms and Jigs |
| CC-6508 technical specifications | - Very Dense, Homogeneous and Fine Surface - Easily Machined - Good Abrasion Resistance | Bath Model for Electroforming process, Lay Up Tools, RIM Tools |
| RAKU-TOOL | Key Properties | Applications |
|---|---|---|
| CC-6010 technical specifications | - Fine Surface Structure - Very Easily Shaped Machined - Similar quality to RAKU-TOOL modeling boards, without bonding lines | Master Models, Cubing Models, Patterns |
| CC-6015 | - Very Easily Machined - Dense Surface Structure - Low Coefficient of Thermal Expansion - Good Edge Strength | Wrapped Models, Molds and Tools for Rapid Prototyping, Tooling Jigs |
| CC-6503 technical specifications | - Very Dense Structure - Very Homogeneous, Fine Surface and as a Result, Very Good Nickel Bowl - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - Good Abrasion Resistance | Galvanobath Models, Lay Up Tools, RIM Tools |
| CC-6504 technical specifications | - Very Dense Structure - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - High Compressive Strength/Stiffness - Good Abrasion Resistance - Tools Do Not Need To Be Polished - Tools Weigh Less (vs Zamak) - Changes are easily possible | Metal Sheet Forming, Jigs |
| CC-6505 technical specifications | - Very Dense Structure - Easily Machined Like WB-1600 - Low Coefficient of Thermal Expansion - High Compressive Strength/Stiffness - Good Abrasion Resistance - Tools Do Not Need To Be Polished - Tools Weigh Less (vs Zamak) - Changes are easily possible | Stretch Dies, Jigs, RTM Tools |
| CC-6506 technical specifications | - Very Dense Surface Structure - Can Be Polished - Good Heat Resistance - High Compressive Strength - Good Resistance to Chemicals - Time Savings Through Direct Milling of Mold via Surface Data - Better Pressing of Sheet Metal Parts | Molds for Ceramic Pressure Casting, Metal Sheet Forming, Vacuum Forming Tools, Lay Up Tools |
| CC-6507 technical specifications | - Dense Surface Structure - Very Easily Machined - Good Dimensional Stability - Good Abrasion Resistance and Impact Strength | Pattern Plates and Core Boxes, Machined Negative and Postives, Models, Molds and Tools, Hammer Forms and Jigs |
| CC-6508 technical specifications | - Very Dense, Homogeneous and Fine Surface - Easily Machined - Good Abrasion Resistance | Bath Model for Electroforming process, Lay Up Tools, RIM Tools |
Epoxy Laminating Resins
Quality resins for special applications in the automotive, marine, composites, and aerospace industries. Products of special note are the EPOLAM 2015 system used in the building of award winning racing yachts and catamarans. It is registered with Lloyds for marine applications. Other special products include EPOLAM 2500 which is FAR 25 approved.
AL 2013
Low vertical sag, Room temperature cure, Low toxicity. technical specifications
AL 2013 LPL
Long pot-life, No vertical sag, Dimensionally stable. technical specifications
AL 2108
Thin film, Chemical and water resistant, Clear, Fast wetting. technical specifications
AL 2120
Excellent high temperature properties, Exceptional wet-out. technical specifications
EPOLAM 2001
Room temperature cure, Good wetting, No MDA.
EPOLAM 2014-2015-2016
Works well in moist environment, Low viscosity, Lloyd's marine certified. technical specifications
EPOLAM 2020
Heat resistant, Variable reactivity with accelerator, Good wetting. technical specifications
EPOLAM 2022
Heat resistant, Low viscosity, Good wetting properties.
EPOLAM 2025
Withstands up to 275°F after post-cure.
EPOLAM 2025L
Heat and chemical resistant, Long pot–life, Low exotherm. technical specifications
EPOLAM 2050
Heat resistant, Low shrinkage, No sag on vertical, Easy cure cycle.
EPOLAM 2080
Heat resistant, Low shrinkage, Accepts fillers. technical specifications
EPOLAM 2500
Self-extinguishing, FAR 25 approved. technical specifications
RSF 816
Low viscosity, UV stable, Clear, Fast curing. technical specifications
Epoxy Casting Resins
Resins for a variety of tooling applications, including vacuum forming, foundry patterns, and ceramic materials.
AC 2308-1
AC 2310
Excellent abrasion resistance, Low viscosity. technical specifications
AC 2320-1 (S/M/F)
EPO 4030
No Post Curing needed, Aluminum filled. technical specifications
EPO 752/2080
Very good mechanical characteristics, Heat resistant. technical specifications
EPO 4040
Machines well, Aluminum filled, Low shrinkage. technical specifications
EPO 5010
Iron filled– Low viscosity, Choice of hardener for varied results. technical specifications
EPO 5019
Iron filled– Long Pot–Life, Abrasion and compression resistant. technical specifications
EPO 5030
Silicone Carbide Filler– Low shrinkage, High hardness, Abrasion resistant.
EPO 5031
Silicone Carbide Filler– Very good mechanical characteristics, Heat resistant.
Epoxy Laminating Pastes
High quality finishes for a variety of surfaces. These composite tooling compounds are designed for the building of tools, models, jigs, and fixtures. When cured these products are very strong, lightweight, and machinable.
EPOPAST 206
Heat resistant, Dimensionally stable, Low density.
EPOPAST 400
Low shrinkage, Low odor, Easy to mix and apply. technical specifications
Syntac Foam Plug Assist
Trelleborg Emerson & Cuming, Inc. Syntac syntactic foam plug assists are produced using high purity, hollow glass microballoons in a high-performance epoxy matrix. These products are favored by aerospace and military customers due to the stringent specifications that they can be manufactured to.
Manufactured in machinable blocks, sheets and rods these products are known for theri outstanding consistency, low void content and easy, low-dust, high-speed milling.
Our syntactic foam plug assist materials also benefit from technical support from a world class team of experts.
The performance of these products meets or exceeds other Syntac syntactic foam plug assist materials on the market.
Benefits of our syntactic foam plug assists:
- Promote even sheet distribution
- Prevent chill marks yielding parts with a high quality, haze free surface
- Eliminate webbing (sheet creasing/folding in corners)
- Maintain dimension stability at high temperature
- Offer low thermal conductivity, minimizing plug sticking and fouling
- Exhibit light weight foreasy handling
- Provide for reduced cycle times to improve production cost efficiencies
- Can be coated, e.g. with PTFE as required
- Better durability than wood, felt and solid polymer tooling for longer tool life
- Maximize tooling flexibility with availability in a variety of shapes, sizes and forms: Blocks, Sheet, Rods, Frozen-one-component kit
Syntac 350
Epoxy composite tooling material - the industry standard that combines economy with good performance and designed for use at temperatures up to 350°F.
- Ideal for forming PVC and PS polystyrene sheet
- Provides improved material distribution
- Eliminates chill mark-off and extends plug life
- Produces a smooth surface finish
- Optimizes cost-efficiency and economy
Typical properties include:
- Density: 42 lbs/ft3
- Color: White
- Shore hardness: 55D
- Compressive strength: 6,500 psi
- Compressive modulus: 339,000 psi
- CTE: 17x10-6 in./in./°F
Syntac 450
Epoxy composite tooling material - High temperature resistant product for forming packaging with high strength and clarity and designed for use at temperatures up to 450°F.
- Ideal for high-heat, high strength tooling
- Improves part clarity
- Reduces sticking; Increase slip
- Provides excellent material distribution
- Well-suited for forming CPET and APET polymers
Typical properties include:
- Density: 46 lbs/ft3
- Color: blue
- Shore hardness 55D
- Compressive strength: 7,400 psi
- Compressive modulus: 341,000 psi
- CTE: 17x10-6 in./in./°F
Syntac 351
Castable syntactic material - premixed, pourable syntactic for custom plug molding and repair.
- Ideal for building plugs with intricate detail
- Offers full compatibility with Syntac 350 material
- Exhibits super smooth finish for increased part clarity
- Maximizes handling flexibility - supplied in 10oz. "caulking" tubes, 1 gallon cans and 5 gallons pails
- Is supplied frozen; requires post curing
Typical properties include:
- Density: 26 lbs/ft3
- Color: White
- Compressive strength: 10,000 psi
- Compressive modulus: 343,000 psi
- CTE: 17x10-6 in./in./°F
Foundry Casting Polyurethanes
The UR products we offer are available in a wide range of hardness as well as high mechanical strengths for tough long lasting prototypes, finished products, or foundry tooling.
UR 3411
Low viscosity, Low moisture sensitivity, Low toxicity, Resists aging. technical specifications
UR 3420
High tensile strength, Moisture resistant, Low toxicity. technical specifications
UR 3435
Low viscosity, Low moisture sensitivity, Resists peeling, Low toxicity. technical specifications
UR 3435L
Low viscosity, Low moisture sensitivity, Resists peeling, Low toxicity. technical specifications
UR 3436
Low viscosity, Low moisture sensitivity, Resists peeling, Low toxicity. technical specifications
UR 3440
Resistant to peeling, Low toxicity, High elongtion. technical specifications
UR 3445
Low viscosity, Low toxicity, Very peel resistant, Semi–flexible. technical specifications
UR 3450
Abrasion resistant, High tensile strength, Resistant to hydrolysis. technical specifications
UR 3460
Abrasion resistant, High tensile strength, Resistant to hydrolysis. technical specifications
UR 3468
Abrasion resistant, Very resistant to peeling. technical specifications
UR 3490
Unbreakable, Abrasion resistant, Low shrinkage, Non–toxic. technical specifications
UR 3558
Impact resistant, Fast demold time, Resistant to peeling. technical specifications
UR 5801/5825
Good tear resistance, Low viscosity, Self–degassing, Pigments well. technical specifications
UR 5801/5835
Good tear resistance, Low viscosity, Self–degassing, Pigments well. technical specifications
UR 5801/5850
Good tear resistance, Low viscosity, Self–degassing, Pigments well. technical specifications
Eccolite Ultra
Thermoplastic composite material - Ultra high temperature, durable product that reduces mold sticking and is designed to maximize slip and clarity.
- Ideal for tough, high temperature (420°F) tooling
- Exhibits super smooth finish for increased part clarity
- Provides for dust-free machining
- Retains minimal polymer residue on plug surface
- Is well suited for forming thin-walled structures, e.g. ribs
Typical properties include:
- Density: 26 lbs/ft3
- Color: White
- Compressive strength: 10,000 psi
- Compressive modulus: 343,000 psi
- CTE: 17x10-6 in./in./°F
Epoxy Surface Coats
A vast range of high performance coatings for standard or difficult applications. The coatings we offer are self–leveling and easy to use.
AS 2003-1
AS 2020
Excellent temperature resistance, No sag on vertical surfaces. technical specifications
EPO 1040/GC2 070
High abrasion resistance, Easy to apply.
S 1/GC1 050
Takes sanding well, Resistant to flaking.
S 10
Iron filled, Abrasion resistant, Dimensionally stable.
S 11
Bonds to wet plaster or concrete, Heat resistant, High gloss finish. technical specifications
S 20/GC1 150
Chemical resistant, Applies easily, Excellent finish, High hardness. technical specifications
S 21/GC2 120
Chemical resistant, Abrasion resistant. technical specifications
S 22/GC1 125
Good thermal conductivity, Sands well, Chemical and heat resistant. technical specifications
S 30/GC1 180
Heat resistant, Compatible with EPOLAM 2080 and 2025, Polishes.
Fabwood Pattern Plank
Fabwood Pattern Plank is manufactured to provide moisture free, knot free, and stress-free pattern plank that is machined and semo-finished to size. Fabwood is designed to take the labor of plaining, jointing, and sanding that usually goes along with regular pattern lumber. Sizes are actual and in almost all cases flat and square for off the shelf machining and gluing.
Fabwood Pattern Plank is available in Mahogany, Sugar Pine, Red Alder, Pine, and Poplar species.
Fabwood Pattern Plank is virtually defect free. The grain is tight and straight and gives a better surface after sanding. Fabwood ends are sealed which reduces possibilities of checking/cracking. Fabwood is a very stable product for foundry pattern work and most prototype thermoforming tooling applications.
Mahogany
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
| 23/4 | 5.75" x 18" x 90" | 64.7 |
Mahogany
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
| 23/4 | 5.75" x 18" x 90" | 64.7 |
Sugar Pine
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 13/4 | 3.25" x 18" x 90" | 36.56 |
| 17/4 | 4.24" x 18" x 90" | 47.81 |
| 21/4 | 5.25" x 18" x 90" | 59.06 |
| 23/4 | 5.75" x 18" x 90" | 64.69 |
Sugar Pine
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 13/4 | 3.25" x 18" x 90" | 36.56 |
| 17/4 | 4.24" x 18" x 90" | 47.81 |
| 21/4 | 5.25" x 18" x 90" | 59.06 |
| 23/4 | 5.75" x 18" x 90" | 64.69 |
Red Alder
| Size | Dimensions | BdFt. |
|---|---|---|
| 10/4 | 2.5" x 18" x 96" | 30 |
| 14/4 | 3.5" x 18" x 96" | 42 |
| 18/4 | 4.5" x 18" x 96" | 54 |
| 22/4 | 5.5" x 18" x 96" | 66 |
Red Alder
| Size | Dimensions | BdFt. |
|---|---|---|
| 10/4 | 2.5" x 18" x 96" | 30 |
| 14/4 | 3.5" x 18" x 96" | 42 |
| 18/4 | 4.5" x 18" x 96" | 54 |
| 22/4 | 5.5" x 18" x 96" | 66 |
Pine
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
| 24/4 | 6" x 18" x 90" | 67.5 |
Pine
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
| 24/4 | 6" x 18" x 90" | 67.5 |
Poplar
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
Poplar
| Size | Dimension | BdFt. |
|---|---|---|
| 8/4 | 2" x 18" x 90" | 22.5 |
| 12/4 | 3" x 18" x 90" | 33.75 |
| 16/4 | 4" x 18" x 90" | 45 |
| 20/4 | 5" x 18" x 90" | 56.25 |
Polyester Fillers and Repair Pastes
The range of fillers and repair pastes that we offer are useful for a variety of jobs including repair of tooling boards, body filling, bonding or laminating. Stand out Materials APF 4 - Repair & bonding of modeling board. APF 7 - Repair on high temperature composite tooling. Certified for Polyester repair for underwater applications. APG 1750 - Polyester Tooling Gelcoat for large tooling plugs in custom yacht and boat manufacturing. Low styrene level & no pre-release on tools.
APF 1
Resistant to freeze/thaw conditions, Impact resistant, Strong adhesion. technical specifications
APF 2
Lightweight, quick setting formula with strong adhesion properties. technical specifications
APF 3
Lightweight, easy to hand carve, Strong bond to wood or tooling board. technical specifications
APF 4
Low shrinkage, Excellent bond properties for metals, plastics, wood, etc. technical specifications
APF 6
No styrene, Chemical resistant, Very smooth consistency. technical specifications
APF 6 Black
No styrene, Chemical resistant, Can withstand up to 400°F. technical specifications
APF 7
High service temperature, Up to 400°F, Chemical and water resistant. technical specifications
APF 77/1
Flame–retardant, Self–extinguishing, FAA approved. technical specifications
APF 1050
Lighweight, short pot–life and a short cure time, Packed in cartridges. technical specifications
APF 1075
Lighweight, Easily carved and finished. technical specifications
APF 1700
Sprayable, Rapid layer build–up when applied in thin coats, Impact resistant. technical specifications
APG 1750
Sprayable high temperature gel coat, High gloss finish. technical specifications
Request a Quote or Information
Fill out the form below this and a representative from thyssenkrupp Engineered Plastics will reach out to you soon.