Copper, Brass, and Bronze Strip for Stamping Plants

Slitting

Copper and Brass Sales precision coil slitting machinery is used only for non-ferrous metals to ensure peak performance at all times. Our slitters accommodate widths up the 48" and thickness up to .150" with tolerances as close as +- .002"

Slitting Specifications

Alloys	Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc
Thickness Capability	Up to 0.015" depending on alloy
Width Capability	0.125" min. 48" max
Tolerances	+-0.005 standard; tighter on request
Camber	One-half commercial tolerance
Burr	Less than 3% of material thickess typical
Other	ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control

Slitting Specifications

Alloys	Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc
Thickness Capability	Up to 0.015" depending on alloy
Width Capability	0.125" min. 48" max
Tolerances	+-0.005 standard; tighter on request
Camber	One-half commercial tolerance
Burr	Less than 3% of material thickess typical
Other	ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control

Slitting Specifications

Alloys	Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc
Thickness Capability	Up to 0.015" depending on alloy
Width Capability	0.125" min. 48" max
Tolerances	+-0.005 standard; tighter on request
Camber	One-half commercial tolerance
Burr	Less than 3% of material thickess typical
Other	ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control

Slitting Specifications

Alloys	Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc
Thickness Capability	Up to 0.015" depending on alloy
Width Capability	0.125" min. 48" max
Tolerances	+-0.005 standard; tighter on request
Camber	One-half commercial tolerance
Burr	Less than 3% of material thickess typical
Other	ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control

Tension Leveling

Our unique coil-to-coil tension levelers remove high crowns and edgewise curvature from coiled strip products. This allows us to deliver coil product processed with the close-tolerance flatness and camber required for critical stamping, lead frame (nickel alloys) and chemical etching.

Coil and Strip Processing Capabilities

Slitting